Description
Mud Pump Fluid End
Mud Pump Fluid end is 100% compatible with original pumps. It is horizontal, triplex, and three separate fluid end sections. It is made with three-piece high quality forged steel.
In addition, All the parts dressed inside are designed for high performance and long life in handling your cementing and pumping jobs.
Description
Fluid-End Type:Horizontal, triplex, three-piece forged steel
Plunger Type:Single-acting, hard-surfaced
Valve Type:Double-guided, carburized, high-contact
Valve Seats:Carburized and replaceable
Pressure Packing:CDI High-performance packing
Discharge Flange: Blank, straight TY with one outlet or with two outlets
Oil System: External; use air tank press
Plunger Size in. (mm) | Maximum Working Pressure |
3 3/8″(85.7) | 20,000Psi / 138Mpa |
4″ (101.6) | 15,000Psi / 103.4Mpa |
4 1/2″(114.3) | 11,200Psi/ 78Mpa |
5″ (127.00) | 9,000Psi/ 65Mpa |
FLUID END ASSEMBLY
1 | FLANGE, DISCHARGE, BLANK | 1 | 316.22980.KOP |
1a | FLANGE, DISCH, RH | 1 | 316.23019.KOP |
1b | FLANGE, DISCH, LH | 1 | 316.23017.KOP |
1c | FLANGE, STRAIGHT | 1 | 316.27482.KOP |
2 | SEAL, DISCHARGE PASSAGE | 6 | 316.2547.KOP |
3 | NUT, 1-14 NF, INTERNAL WRENCHING | 4 | 316.11621.KOP |
4 | STUD,FLUID END TO DISCH. FLANGE * | 4 | – |
5 | BOLT, TOP, TIE | 1 | 316.27488.KOP |
6 | NUT, TOP TIE BOLT | 2 | 316.25501.KOP |
7 | WASHER, HARDENED | 2 | 315.11183.KOP |
8 | SPACER, INN, DISCH PASS SEAL | 2 | 316.2545.KOP |
9 | FLUID END SECTION | 3 | 316.22982.KOP |
10 | NUT, ELASTIC * | 2 | – |
11 | BOLT, BOTTOM, TIE * | 1 | – |
** | BOLT, TIE, FLUID END, TOP | 2 | 316.27489.KOP |
** | STUD, FLUID END TO POWER END | 12 | 316.24923.KOP |
Reviews
There are no reviews yet.